Product Features
1. USB LED Strip Lights: The tv back led strip lights length is
1M-3M(3.28ft-9.84ft).Used for lighting up TV (HDTV)/Desktop
monitor. With 5V USB cable connector and 24 keys remote controller
for RGB color changing, flash, strobe, fade, smooth, and brightness
dimming .RF controller can remote with 19.6ft-26.2ft distance. The
attached USB cable length is approx 1M/3.28ft for power supply.
2. Protect your eye: TV Backlight, reducing the eyestrain caused by
differences in picture brightness, creates a beautiful bias
lighting when watching TV ; Adds a great backlighting to your
monitor, TV, desktop, PC, reducing the eye strain caused by movies
scene, shows and games. The led strip lighting can also make colors
on your screen more even.
3. Easy Installation: Use the firm adhesive tape to attach to any
surface, provides secure and strong installation don't worry about
falling off, flexible strips bend to your desired positions . It
fits for 32inch to 60inch HDTV. Besides, you can cut the LED strip
light according to the cutting marks to get the suitable length you
need.
4. Safe By USB Powered :The led bar lights working voltage input
5V. Low voltage input lighting strips won't get hot! It is
touchable and safe for your kids . Plug into the USB port on your
TV set, PC, Laptop ,Power Bank or Phone charger.
5. Waterproof Class & Quality Assurance:IP65 waterproof. The
colourful rgb led light strip kit can used for boutique lighting,
stairs lighting, makeup mirror, wine cabinet decoration, Christmas,
Halloween, festival lighting decoration, clubs, and other
application decoration with the stong sticky 3M adhesive tape.12
months warranty and 90days free replacement or refund with
unsatisfied.
6. Multi-Color & Mode:16 colors 6 Light pattern:
Static/Dimming/Flash/Strobe/Fade-change/RGB Smooth-change
Tips and Attention
About using USB RGB led strip kit with 24 keys RF remote controller
- The cable connections must be in towards to the arrows.
- Pull out the transparent chip from the button of the IR remote
before you use the strip.
- Clean the surface before stick on the strip.If it is not sticky
enough, you can add some double sided tape.
- Please don't stick the lights to metal surface that conductive. It
may cause a short-circuit on the strip light.
- Don't leave them on the spool when you testing them more than 2
mins. They need to dissipating heat.
- Once the strips are cut, both ends will need separate power
sources.
- If cuts are made by accident it can be fixed by adding additional
connector( NOT included)
