Product Features
1. Ultra bright and high-quality LED chips allows the LED lights to be very colorful and durable. The remote can dim the LED light strip and offer many different colors and modes by 20 keys remote
2. 4 music sync modes
3. Cutable and linkable Color changing LED Strip Lights can be cut to every 3 leds along the cutting mark,have a stronger adhesive that is stronger than others, they stick very well on TVs, cars, cabinets and walls. Please test the led strip lights before installation, every roll lights has one connector to link with controller box, so they should be attached in parallel, not in series
4. Multi-color and multipurpose with 20 keys remote controller which can be used 360° and more accurate than IR remote, working distance is up to 40- 45ft, strong Signal even penetrate walls and doors and cabinet.
5. Bluetooth controll RGB usb 5v Led strip kit, with music sync, no network setting required.
6.Group controll: one phone can control multi led lights
7. Energy Saving and Safe High safety performance. The working voltage is DC5V in USB port. Extremely low heat. It is safe and reliable .
8.Timer Function: You can set time to turn on & the light
How to use the APP ?
· Download the APP “ Led Lamp ” in Google play or Apple store or via the QR code on the manual/controller.
· Open the APP and make sure your phone is Bluetooth enabled
· Click on the upper left corner,search the device and connect to the light, you can freely change colors, brightness, multiple scene modes.
[NOTE]: In the App, you can connect many light strips via bluetooth and control them at the same time, but if you just want to change one light setting, you can disconnect the other lights in the APP.
Tips and Attention
About using APP USB RGB led strip kit with 20 keys RF remote controller
- The cable connections must be in towards to the arrows.
- Pull out the transparent chip from the button of the IR remote before you use the strip.
- Clean the surface before stick on the strip.If it is not sticky enough, you can add some double sided tape.
- Please don't stick the lights to metal surface that conductive. It may cause a short-circuit on the strip light.
- Don't leave them on the spool when you testing them more than 2 mins. They need to dissipating heat.
- Once the strips are cut, both ends will need separate power sources.
- If cuts are made by accident it can be fixed by adding additional connector( NOT included)
